glued flooring

Vinilet

Features
Coextruded, calendered vinyl floor covering with a wearing layer made of vinyl resins modified with acrylic resins and primary plasticisers. The substrate is produced using reprocessed scraps of the tiles themselves with the addition of virgin material to obtain the required quantities. The marble effect runs through the entire depth of the wearing layer which constitutes about half of the total thickness.

Laying
VINILET must be laid using the same technique adopted for vinyl floors on substrates that are perfectly smooth, dry, solid and, above all, protected from possible water infiltration. VINILET must be laid at an ambient temperature of at least 18° C – a condition that is essential to maintain in the 24 hours prior and subsequent to installation.

Areas of application
Schools, hospitals, nursery schools, clinics, public and private offices, homes.

Dimensional stability:
(UNI 7071) 6 ore 80°C variazioni longitud. ≤ 0,3% - trasvers. ≤ 0,1%

Resistance to wear:
(ASTM D1044) Taber abrasion, load 1000 gr.
100 revs, weight loss 2.8 mg.

Flexibility:
(UNI 7071) flexes on spindle ø <25 mm.

Loss of volatile materials:
(UNI 7071) 0,6%

Specific weight:
(ASTM D 792) 1,5 g/cm ³

Residual penetration:
(UNI 7071) 0,05 mm.

Resistance to chemical agents:
(UNI 7071) resists all products in common use.
Does not resist aromatic, ketonic and chlorinated solvents.

Available colours

Zoom image

Art 1113

Tile size: 37 x 37 cm.
Total thickness: 2.2 mm.
Weight: approx 3.2 kg/m2
Packaging: 38 tile boxes, covering capacity 5.20 m2
Colours: GR 1 - GR 2 - GR 3 - GR 4 - BL 1 - BL 2 - BL 3 - VR 1 - VR 3 - GL 1 - GL 2 - AR 1- RS 1 - RS 2

Art 1114

Formato: piastrelle da 37 x 37 cm.
Spessore totale: 2,2 mm.
Peso: ca 3,2 kg/mq
Confezioni: scatole da 5,20 mq. pari a n° 38 piastrelle
Colori: 01 - 02 - 03 - 04 - 05 - 06 - 07